Integrity promise Connaught, intentions to do everything.

Export manufacturer

Passed Certifications - ISO9001:2015

TN Product tested by National Coal Science Institute and Provincial Quality Inspection Center

Except for the basic model, the deep groove ball bearing has some other structures, such as the deep groove ball bearing with dust cap, that of with fibre sealed ring, double row deep groove ball bearing, and so on.

The standard deep-groove, or Conrad, ball bearing is the most simple from the standpoint of design and construction. At the same time, it has the greatest all-around use. Although it is primarily a radial bearing, it is capable of handling moderate thrust loads from either direction and operating at relatively high speeds.

Types

Basic type; With snap ring groove on the outer ring (-N); With one shield (-Z) on one side or two shields (-2Z) on both sides; With one seal (-RS) on one side or two seals (-2RS) on both sides.

All of Our products are made of Chrome Steel GCr15, with grinding groove and superfinishing technology. 

Application

Mining machine, conveyor machine,  Engineering Machinery,  Agricultural Machinery, Construction Machinery, textile, chemical, auto motor, Transportation Vehicles, General industrial Equipment, etc.

Catalog of Deep groove ball bearing

Professional brings quality, detail creates success

XKTE bearing's most fundamental difference is:

The other manufacturers make products considering the price cheap, but we make products considering the service life. Each of the idler roller bearings we produce is fully implemented in the national standard. XKTE bearings exist for their quality and brand. You can deny our price, but you can never find out our products' defects in quality. XKTE conveying machinery bearing, a big brand, is worthy of your trust.

First, the identification of the bearing

Formal manufacturers use laser engraving. The stamps are deep, have significant dents with hand touch, good-looking, with no breakpoints, and are never disappeared. This obviously improves the bearing grade. 

The use of bearing retainer

Bearing retainer selection is very important. Because once too much dust stuck into the bearing, the retainer will be first worn. If the bearing retainer is broken, the bearing will be directly broken. Imported bearings use big rivets to thicken retainers. XKTE bearing is completely in accordance with the process of imported production, so each piece of ours is made to a high quality, and guaranteed to operate for thirty thousand hours.

The ring is the main part and the important part of the idler roller bearing. Best idler roller bearing has deep groove ball, and large clearance. But deep groove doesn't mean to dig the channel with a simple way of enlarge the steel ball. The thickness of the bearing is certain, so to get the ball big and the groove deep will shorten service life. Our XKTE bearing uses way of thickening ring to get the standard of deep groove and large clearance, improves the anti-stuck performance, and effectively increases the service life. 

Bearing material and hardness

Good idler roller bearing must be made of bearing steel, named "High Carbon Chromium Bearing Steel (Fully quenched class) GCr15". At present the standard hardness of idler roller bearing is 60-65 degree, while hardness of ring is 61-62 degree, andball is 64-65 degree.

The simple way to identify idler roller bearing is to see if its hardness is over 60 degree, because only bearing steel can get over this degree.

Grease selection of roller bearing

Many customers ignore this most critical point. The thirty-thousands-hours operation is a very long term. This has to be guaranteed by enough quality and quantity grease. And this should also be taken into account of working in different seasons.

Special note: please choose special high temperature grease if working environment is over 120 °C for long time or low temperature grease if it below -20 °C.

Reference:

Reasons and settlements for the unusual noise of the deep groove ball bearing

1. The noise made by retainer

Reasons: that is made by the shock of retainer no matter what kind of grease it uses. The case is worse especially when the clearance is big.

Settlements: increase the precision of retainer, choose the deep groove ball bearing with small clearance, decrease the errors of instalation, choose good grease.

2. Continuous buzzing

Reasons: the motor shakes unusually while running with no load. It is often caused by bad grease, unstable shock because the feature of self-aligning is bad.

Settlement: choose good grease, increase the load and decrease the error of instalation, choose the deep groove ball bearing with small clearance, increase the hardness of the motor, enhance the self-aligning feature.

3. The noise with impurities

Reasons: caused by the cleanliness of grease. The noise is caused often on the dynamo which is come and go and varying.

Settlement: choose good grease and increase the cleanliness of the grease, enhance the tightness of the deep groove ball bearing, increase the cleanliness of the installing environment.

4. The noise of shock with high frequency

Reasons: the planeness of the component surface is the main reason for the noise.

Settlement: increase the planeness of the component surface, improve processing quality of the component surface, decrease damage of the deep groove ball bearing, improve the instalation of the bearing base.

Other Products

Package:

1. Industrial packaging : Single box + outer carton + pallets 

2. Neutral Packing:

Tube package + outer carton + pallets 
Tube package + middle box + outer carton + pallets 

3. As buyer's request

Payment methods:

1) TT, 30% deposit , 70% before shippment.

2) L/C at sight. (high bank charge, not suggest , but acceptable )

3) 100% Western Union in advance. (specially for air shipment or small amount)

Started 2006, We are a manufacture of industrial Bearing in Liaocheng Shandong, concentrates on manufacturing industrial bearing, mainly used in conveying equipment, machinery, textile, chemical, auto motor and so on. Especially bearing for conveyor, which make us become one of well-known enterprise in China. We have 26 production lines, mainly produce deep groove ball bearing, spherical roller bearing, TN Nylon cage bearing and sealed bearing.

All of Our products are made of Chrome Steel GCr15, with grinding groove and superfinishing technology. Supply ability is about 20000 Pieces / per Day. We have our own brand XKTE, and we can also provide OEM service.

FAQ:

I couldn't find a design to fit my application in your catalog. Can you help me design a bearing?

Yes, technical expertise is available to assist you with engineering design for custom products. Available options include, but are not limited to, custom rings, retainers, balls, shields, lubricants, and packaging. We look forward to working with you to satisfy your rotary motion requirements.

What causes bearing noise?

Bearing noise is a function of both the bearing and the way it is used. Some external factors that affect bearing noise include lubricant type, excessive bearing load, and improper installation. Once the abnormal noise occurred, you can contact our engineers, we will help you find the reasons and provide the appropriate solutions.

What is the difference between using a shield or a seal as a ball bearing closure?

Shields or seals are often installed to retain lubricant and to prevent contamination from entering the bearing. While a shield contacts the outer ring and does not come in contact with the inner ring, the seal generally comes in contact with both the inner and outer rings. Torque or drag is lower with a shield than with a seal. Alternately, the seal provides a higher degree of protection from contamination. Shields and seals are available in a variety of materials and configurations.

XKTE developed a serious of sealing methods for different applications. Please contact a XKTE engineer for technical assistance with any special requirements.

Why choose us ?

1. professional commitment to conveying machinery bearing, leading enterprise of conveyor

machinery bearing in China.

2. With background of about 10 years
3. Strict Inspection ,and the best quality price with reasonable price bearings provided .
4. OEM service provided.
5. Delivery products from our factory warehouse , short delivery time.

86-15688862750

02 at xinkaite.com

www dot xinkaite dot com